Vertex Standard FT-817nd User Manual download pdf (Page 2)

Specifications

General

Frequency Range:

Receive: 100 kHz-30 MHz

50 MHz-54 MHz

76 MHz-108 MHz (WFM only)

87.5 MHz-108 MHz (EU)

108 MHz-154 MHz (USA)

144 MHz-148 (146) MHz (Other markets)

430 (420) MHz-450 (440) MHz

Transmit:160-6 Meters

2 Meters

70 Centimeters (Amateur bands only)

5.1675 MHz Alaska Emergency Frequency

(USA only)

Emission Modes:

A1 (CW), A3 (AM), A3J (LSB/USB), F3 (FM),

F1 (9600 bps packet), F2 (1200 bps packet)

Synthesizer Steps (Min.):

10 Hz (CW/SSB), 100 Hz (AM/FM)

Antenna Impedance:

50 Ohms, Unbalanced (Front: Type BNC, Rear: Type M)

Operating Temp. Range:

–10 °C to +60 °C (+14 °F to +140 °F)

Frequency Stability:

±4 ppm from 1 min. to 60 min after power on.

@25 °C: 1 ppm/hour

±0.5 ppm/1 hour @25 °C, after warmup

(with optional )

Supply Voltage:

Normal: 13.8 VDC ± 15 %, Negative Ground

Operating: 8.0-16.0 V, Negative Ground

FBA-28 (w/8 “AA” Alkaline Cells): 12.0 V

FNB-72 (Ni-Cd Battery Pack): 9.6 V (Option)

FNB-85 (Ni-MH Battery Pack): 9.6 V (FT-817ND)

Current Consumption:

Squelched: 250 mA (Approx.)

Receive: 450 mA

Transmit: 2.0 A

Case Size (W x H x D):

135 x 38 x 165 mm (5.31” x 1.5” x 6.50”)

Weight (Approx.):

1.17 kg (2.58 lb)

w/Alkaline battery, antenna, w/o Microphone

Transmitter

RF Power Output:

5 W (SSB/CW/FM), 1.5 W (AM Carrier) @13.8 V

Modulation Types:

SSB: Balanced Modulator

AM: Early Stage (Low Level)

FM: Variable Reactance

FM Maximum Deviation: ±5 kHz (FM-N: ±2.5 kHz)

Spurious Radiation: –50 dB (1.8-29.7 MHz)

–60 dB (50/144/430 MHz)

Carrier Suppression: >40 dB

Opp. Sideband Supp.: >50 dB

SSB Frequency Response: 400 Hz-2600 Hz (–6 dB)

Microphone Impedance:

200-10k Ohms (Nominal: 600 Ohms)

Receiver

Circuit Type: Double-Conversion Superheterodyne

Intermediate Frequencies:

1st: 68.33 MHz (SSB/CW/AM/FM); 10.7 MHz (WFM)

2nd: 455 kHz

Sensitivity: SSB/CW AM FM

100 kHz-500 kHz – – –

500 kHz-1.8 MHz – 32 µV –

1.8 MHz-28 MHz 0.25 µV 2 µV –

28 MHz-30 MHz 0.25 µV 2 µV 0.5 µV

50 MHz-54 MHz 0.2 µV 2 µV 0.32 µV

144/430 MHz 0.125 µV – 0.2 µV

(IPO, ATT off, SSB/CW/AM = 10 dB S/N, FM = 12 dB SINAD)

Squelch Sensitivity: SSB/CW/AM FM

1.8 MHz-28 MHz 2.5 µV –

28 MHz-30 MHz 2.5 µV 0.32 µV

50 MHz-54 MHz 1 µV 0.2 µV

144/430 MHz 0.5 µV 0.16 µV

(IPO, ATT off)

Image Rejection: HF/50 MHz: 70 dB

144/430 MHz: 60 dB

IF Rejection: 60 dB

Selectivity (–6/–60 dB):

SSB/CW: 2.2 kHz/4.5 kHz

AM: 6 kHz/20 kHz

FM: 15 kHz/30 kHz

FM-N: 9 kHz/25 kHz

SSB (optional YF-122S installed): 2.3 kHz/4.7 kHz (–66 dB)

CW (optional YF-122C installed): 500 Hz/2.0 kHz

CW (optional YF-122CN installed): 300 Hz/1.0 kHz

AF Output: 1.0 W (8 Ohms, 10% THD or less)

AF Output Impedance: 4-16 Ohms

Specifications are subject to change without notice, and

are guaranteed within amateur bands only.

Frequency ranges vary according to transceiver version;

check with your dealer.

service-repairmanual.com

1 2 3

Comments to this Manuals

No comments

Vertex Standard FT-817nd User Manual Page 2

Comments to this Manuals