Vertex Standard VX-456 Specifications download pdf (Page 18)

VX-456 Operating Manual

16

r

If a Speaker/Micro-

phone i s a v a i l a b l e ,

remove the plastic cap

and its two mounting

screws from the right

side of the transceiver,

then a l i g n t h e c o n -

nector of the Speaker/

Microphone on the transceiver body; secure the

connector pin using the screws supplied with the

Speaker/Microphone. Hold the speaker grille up

next to your ear while receiving. To transmit,

press the

PTT

switch on the Speaker/Micro-

phone, just as you would on the main trans-

ceiver’s body, and speak into the microphone on

a normal voice level.

Note 1): Save the original plastic cap and its

mounting screws. They should be reinstalled

when not using the Speaker/Microphone.

2) When you press the PTT switch on the

Speaker/Microphone, it disables the internal

microphone, and vice versa.

operatIon

r

If the BCLO (Busy Channel Lockout) feature

has been programmed on the channel, the radio

will not transmit when a carrier is present. In-

stead, the radio will generate short beep three

times. Release the

PTT

switch and wait for the

channel to be clear of activity.

r

If the BTLO (Busy Tone Lockout) feature has

been programmed on the channel, the radio

can transmit only when there is no carrier be-

ing received or when the carrier being received

includes the correct tone (CTCSS tone or DCS

code) on the channel.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

Comments to this Manuals

No comments