Vertex Standard VXA-150 Specifications download pdf (Page 13)

VXA-300 PILOT III OPERATING MANUAL

Low Battery Indication

 As your battery discharges during use, the voltage will

gradually become lower. When the battery voltage

reaches 6.0 Volts, the “ ”

icon will blink on the LCD dis-

play, indicating that the battery

pack must be recharged before

further use.

 Avoid recharging Ni-MH batteries before the “Low

Battery” indicator is observed, as this can degrade the

charge capacity of your Ni-MH battery pack. Vertex

Standard recommends that you carry an extra, fully-

charged pack with you so you will not lose communi-

cations capability due to a depleted Ni-MH battery.

BEFORE YOU BEGIN

Installing the FBA-25A (option) Alkaline

Battery Case

The optional FBA-25A Battery Case allows operation of

the VXA-300 using six “AA” size Alkaline batteries.

When installing batteries, insert the (–) end first, then press

in the (+) end so the battery snaps into place. Always re-

place all six batteries at the same time, paying attention to

the polarity indicated inside the case.

The FBA-25A must not be used with recharge-

able cells. The FBA-25A does not contain the

thermal and over-current protection circuits (provided

in the “FNB” series of Ni-MH Battery Packs) required

when utilizing Ni-Cd and Ni-MH cells.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 59 60

No comments

Vertex Standard VXA-150 Specifications Page 13