Vertex Standard VXA-150 Specifications download pdf (Page 37)

VXA-300 PILOT III OPERATING MANUAL

VOR NAVIGATION

To Select the DVOR Mode

 When entering the NAV band (108.000 - 117.975

MHz), the VXA-300 selects the DVOR mode auto-

matically. The “COURSE INDICATOR” field will appear

at the upper left corner on the display, and the “ ”

or “ ” indicator will appear below the “Course

Indicator” field on the display.

Note: The “COURSE INDICA T OR” indicates “ ” when

either your aircraft is too far away from the VOR station

or the frequency is not correctly set to that of the VOR

station. Conversely, the “Course Indicator” will indicate

“ ” when a localizer signal is being received.

 The “ ” or “ ” flag indicators tell you whether

the VOR navigation information is based on a course

leading to the VOR station or leading away from the

VOR station.

 To change the flag from “ ” to “ ” or vice versa,

press the

[

]

key momentarily, then press the

[

(

FROM

)]

[

(

)]

key, respectively.

 The small “COURSE INDICATOR” and “ / ” flag

indicators may be toggled to the larger “Frequency”

portion of the display. To do this, press and hold in

the

[ ( )]

key for 2 seconds to toggle to the larger

display area. Press the

[ ( )]

key momentarily

again to return to the smaller displays.

COURSE Indicator

“TO”-“FROM” Flag Indicator

2 seconds

( )

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 59 60

Comments to this Manuals

No comments

Vertex Standard VXA-150 Specifications Page 37

Comments to this Manuals

Related products and manuals for Two-way radios Vertex Standard VXA-150