Vertex Standard EVX-5400 User Manual download pdf (Page 8)

EVX-5400 OpErating Manual

Rear Panel

controls & connEctors









Antenna Jack

The 50-Ohm coaxial feedline to the antenna must be connected here, using a

mini-UHF plug.



13.6V DC Cable Pigtail with Connector

The supplied DC power cable must be connected to this 2-pin connector. Use

only the supplied fused cable, extended if necessary, for power connection.

Replace only with the same or equivalent type fuse.



External Speaker Jack

An external loudspeaker may be connected to this 2-contact, 3.5-mm mini-

phone jack.

Caution: Do not connect either wire of this line to ground, and be certain that

the speaker has adequate capability to handle the audio output (12 W) from

the radio.



D-Sub 15-Pin Accessory Connector

External TX audio line input, PTT (Push To Talk), Squelch, and external RX

audio line output signals may be obtained from this connector for use with ac-

cessories such as data transmission/reception modems, and external Channel

control input, etc.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

No comments

Vertex Standard EVX-5400 User Manual Page 8