Vertex Standard VX-454 User Manual download pdf (Page 29)

VX-450 SERIES OPERATING MANUAL

CALL

When using the DTMF Paging System

This feature, if enabled, allows the user to change the

3-digit Page Call code, used to call other similarly-

equipped stations. Press (or press and hold) the as-

signed programmable key, followed by the three dig-

its representing the Page Call code of the station you

wish to call. Three tones will be heard after the last

key is pressed (the new code will now be transmitted).

The receiver squelch of the other station will be

opened, and you can begin communication.

When using the 2-tone/5-tone Signaling System

This feature, if enabled, press (or press and hold) the

assigned programmable key to send a 2-tone/5-tone

sequential tone.

When using the MDC1200 System

This feature, if enabled, press (or press and

hold) the assigned programmable key to send

an MDC1200 code.

 Press (or press and hold) the assigned programmable

key to enter the “Call Menu” mode.

 Press the SIDE-1/SIDE-2 to select the desired Call

mode, then press the

[

]

key to accept the selection.

You may cancel the selection by pressing the

[

]

key.

ADVANCED OPERATION

 Press the SIDE-1/SIDE-2 to select the station to be

called.

You may enter the station’s ID number (four digits)

directly from the 16-Button DTMF keypad (

[

] - [

]

[

]

[

]

[

]

: substitute for “E”, and

[



]

: wild card),

if your transceiver is VX-459.

 Press the PTT switch to send an MDC1200 call.

STATUS SET

(

VX-454 AND VX-459 ONLY

)

Press (or press and hold) the assigned Programmable

key to change the 5-Tone status code. To change the

status code, select the desired digit by

[

]

key, then

change the number by

[

]

[

]

key, and store the num-

ber by

[

]

key.

STATUS UP/DOWN

(

VX-454 AND VX-459 ONLY

)

Press (or press and hold) the assigned Programmable

key to select a 5-Tone status code from the pre-de-

fined status list.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 39 40

Comments to this Manuals

No comments

Vertex Standard VX-454 User Manual Page 29

Comments to this Manuals

Related products and manuals for Two-way radios Vertex Standard VX-454