Vertex Standard VXA-150 Specifications download pdf (Page 48)

VXA-300 PILOT III OPERATING MANUAL

[

SQL

]

Function: Squelch Level Setting.

Available Values: 0 ~ 8

Default Setting: 6

Select a setting for this Menu item which just silences the

receiver when no signal is present. Use the lowest setting

which will keep the receiver quiet between incoming trans-

missions.

[

MCLR

]

Function: Memory Channel Clear (“MR” memory only).

To clear a Memory channel:

 Select the Menu Item MCLR.

 Press the VOLUME knob, then rotate the DIAL se-

lector knob to recall the memory channel to be erased.

 Press the VOLUME knob to clear the Memory chan-

nel (the Memory channel number will return to

“001”).

Important Notice: An “erased” channel cannot be restored,

and “CH-001” cannot be erased, as it is used for “Priority

Channel” operation.

(

“SET”

)

MODE

[

RESM

]

Function: Scan-Resume Mode Setting.

Available Values: 5S/CAR

Default Setting: 5S

“5S” (5-Second Pause) mode: the scanner will halt for

five seconds only, after which scanning will resume

(whether or not the other station is still transmitting).

“CAR” (Carrier Drop) mode: the scanner will remain

halted for as long as there is a carrier present on the chan-

nel; after the carrier drops at the end of the other station’s

transmission, the scanning will resume.

[

SCNL

]

Function: Scan Lamp On/Off (while paused).

Available Values: on/oFF

Default Setting: on

If you set this function to “on,” the lamp will be illumi-

nated whenever the scanner pauses. The lamp will go off

automatically when scanning resumes.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 59 60

Comments to this Manuals

No comments

Vertex Standard VXA-150 Specifications Page 48

Comments to this Manuals

Related products and manuals for Two-way radios Vertex Standard VXA-150